Part 3: Build Your Complete Titleist GTS Setup
This is Part 3 of our 3-part Titleist GTS series. Part 1 covers the GTS drivers and Part 2 covers the GTS fairway woods.
Introduction: Start with a Cohesive Core
Most golfers cobble their bags together over years — a driver from one brand, a fairway from another, irons from a third. The result is a bag with no identity, where every club launches and feels a little different.
A better approach: build a cohesive long-game core first, then round out the rest of the bag around it.
That's where the Titleist GTS driver and fairway come in. Matched to the same swing profile, they launch, feel, and perform like a family — giving you a consistent foundation off the tee and from the fairway. From there, you fill in irons, wedges, and a putter that fit your eye and your game.
This guide walks you through choosing your GTS profile, building your driver-and-fairway core, and completing the rest of your bag the smart way.
Step 1: Identify Your Swing Profile
Before you buy a single club, know your profile. The Titleist GTS line is built around two swing archetypes: GTS2 for sweepers, GTS3 for strikers.
GTS2 Profile: The Sweeper
- Swing speed: moderate
- Attack angle: level or slightly ascending
- Ball flight: higher, with consistent carry distances
- Handicap: mid to high (8–20+)
- Best for: forgiving, easy-to-launch clubs that carry the ball without extra effort
GTS3 Profile: The Striker
- Swing speed: faster
- Attack angle: descending, with forward shaft lean
- Ball flight: lower, penetrating, controlled
- Handicap: low to single digit (0–8)
- Best for: adjustable, workable clubs that reward precision and allow shot-shaping
Unsure which profile is yours? That's what a ParWest Golf fitting is for. We'll measure your swing speed, launch, attack angle, and spin on the launch monitor, then match you to the right GTS models. New to fittings? Start with our 2026 Golf Club Fitting Guide.
Step 2: Build Your GTS Long-Game Core
The Driver: Your Foundation
GTS2 golfers: GTS2 driver — maximum forgiveness, high launch, stable.
GTS3 golfers: GTS3 driver — Tour-level adjustability, lower-spin, precise.
Your driver choice sets your profile. Pick your loft, shaft, and weight setup at a fitting — this is where it matters most. For the full breakdown of GTS2 vs GTS3 vs GTS4, see Part 1, or compare the GTS line against the field in our 2026 driver comparison.
The Fairway: Your Workhorse
GTS2 golfers: GTS2 fairway — high launch, forgiving, easy off the deck.
GTS3 golfers: GTS3 fairway — lower-spin, adjustable, workable.
Both are $399.99, in right and left hand. Most golfers carry one fairway (a 3-wood); add a 5-wood if you want extra gap coverage. Full details in Part 2: the GTS fairway guide.
Why match them: a GTS2 driver and GTS2 fairway share the same forgiving, easy-launching character; the GTS3 pair leans on adjustability and lower spin. Matching them gives you a long game that behaves consistently from the tee through the fairway.
Step 3: Complete the Rest of Your Bag
With your GTS driver-and-fairway core locked in, round out the bag around it. You don't need everything to be the same model — you need each club to fit your swing and gap cleanly into the next.
- Gap club (5-wood or hybrid): Most golfers have a distance gap between their 3-wood and their longest comfortable iron. A 5-wood or hybrid bridges it — we can test both to see which trajectory suits you.
- Irons: Your scoring engine from roughly 130–190 yards. Game-improvement irons maximize forgiveness; players' irons reward precision. A fitting matches the right set to your swing.
- Wedges: A typical setup adds a gap, sand, and (optionally) lob wedge above your pitching wedge, with lofts spaced about 4–6° apart.
- Putter: The most personal club in the bag — fit to your eye, stroke, and feel.
We carry irons, wedges, and putters across the major brands. The fastest way to build the rest of your bag right is a fitting — book one here or browse our full club selection.
The Ball: Don't Overlook It
The ball is the one piece of equipment you use on every shot. Matching it to your swing speed and spin profile matters as much as your clubs. Titleist's Pro V1, Pro V1x, and AVX cover most players — for example, the Pro V1x Left Dash is built for higher swing speeds and lower spin. We'll factor ball choice into your fitting based on your numbers.
Why Build Around a Cohesive Core?
Consistency
A matched GTS driver and fairway launch and feel alike, so your long game behaves predictably. Your swing doesn't have to adapt from club to club — the equipment carries the consistency.
Confidence
When you trust how your driver and fairway perform, you swing freer. That confidence is worth real strokes over 18 holes.
Build at Your Own Pace
You don't have to buy it all at once. Start with the driver, add the fairway, then fill in the rest over time — with a free fitting at every step.
Protecting Your Investment: Headcovers
New woods deserve protection. Explore our collection of 250+ golf headcovers — from Portland-exclusive PDX Carpet designs to professional monograms. Give your driver and fairway the protection they deserve, with a design for every personality.
Build Your GTS Setup at ParWest Golf
Every GTS club purchase includes a FREE fitting session with our Titleist Certified Fitters — a $100–$300 value at most shops.
Build your bag piecemeal:
- Start: GTS driver + free fitting. Lock in your profile.
- Next: GTS fairway + fitting. Complete your long-game core.
- Then: Round out irons, wedges, and a putter as you go.
Schedule your fitting: Book your free fitting at ParWest Golf in Portland, Oregon, or call (503) 408-1216.
GTS Setup FAQ
How do I build a Titleist GTS setup?
Start with your swing profile. Moderate speed with a level strike points to the GTS2; faster speed with a descending strike points to the GTS3. Build your core around the matching GTS driver and fairway wood, then round out your irons, wedges, and putter with a fitting. Matching your driver and fairway to the same profile gives you consistency through the long game.
Should my GTS driver and fairway match, or can I mix them?
You can mix them — a GTS3 fairway pairs fine with a GTS2 driver — but matching both to one swing profile gives you the most consistent launch and feel through your long game. A fitting confirms the right combination for your swing.
What are typical yardage gaps between the driver, fairway, and the rest of the bag?
A well-gapped bag spaces clubs roughly 10–15 yards apart through the irons and 20–30 yards apart through the longer clubs: driver, then 3-wood, then a 5-wood or hybrid, then your long irons. During a fitting at ParWest Golf we verify your actual carry distances and fill any holes with the right club or loft.
Do I need a hybrid or a 5-wood to fill the gap after my fairway?
Usually yes. Most golfers have a distance gap between their 3-wood and their longest comfortable iron. A 5-wood or a hybrid bridges it. Which one depends on the trajectory and turf interaction you prefer — we can test both during a fitting.
Can I build my GTS setup piecemeal?
Yes. Start with the driver, add the fairway, then round out the rest of your bag over time. Each club purchase at ParWest Golf includes a free fitting, so you can dial in each piece as you go.
Final Word
Golf is hard enough without fighting your equipment. Build a cohesive GTS core — driver and fairway matched to your swing — and round out the rest of your bag with a fitting, and you'll have a setup that works together instead of against you.
The GTS drivers and fairway woods are in stock now at ParWest Golf in Portland. Free fitting with every purchase.
Start here: GTS2 Driver | GTS3 Driver | GTS2 Fairway | GTS3 Fairway
Call (503) 408-1216 or book your fitting online.
